CIRCLE LABS
Products
Circle Labs A200
The A200 is now Circle Labs’ flagship integrated amplifier
This amplifier uses proprietary solutions from Circle Labs.
The minimalist preamplifier based on the E88CC tube is combined with a solid-state power amplifier in Circle Power technology. This solution combines the advantages of tube and transistor amplifiers. The low output impedance of the final stage, and thus the high damping factor, ensures appropriate dynamics and good drive for most of the loudspeakers available on the market.
The amplifier is equipped with a remote control.
The producent Warranty is 2 years. Price is 98500 NOK
Specification
Power (RMS): 100W/8Ω, 200W/4Ω
Frequency: 10Hz-130kHz (-3dB)
Input sensitivity: 0,9V (full power)
Amplification: 34dB
Input impedance: 25kΩ
Output impedance: 0,016Ω
Damping factor 8Ω: 500
Dimensions (W x D x H): 430 x 360 x 180mm
Weight: 20kg
Shipment weight: 28,5kg
Power consumption:
Stand by: < 0,1W
On Const: 70W
ON Max: 500W
Circle LaBS P300
The P300 preamplifier is a fully balanced design.
The creation of the P300 was inspired by the idea of a preamplifier that is truly neutral with the shortest possible signal path. Inner cabling was strictly limited.
The preamplifier was designed around the newest JFET and BJT transistor types and uses a proprietary Circle Amp topology.
Volume is controlled by a resistor ladder and a remote is supplied.
Warranty is 2 years. Price is 68000 NOK
Specification
Line inputs:
2 x XLR, 3 x RCA
Line outputs:
2 x XLR
Input impedance:
33 kΩ RCA, 66 kΩ XLR
Output Impedance:
15 Ω
Reinforcement:
8 dB
Frequency response:
2Hz-500kHz (-3db)
Size (W x D x H):
430 x 342 x 127 mmNet weight:
10.6 kg
Shipping weight:
12 kg
Circle Labs M200
The M200 is a stereophonic power amplifier that can optionally become a fully balanced monoblock.
Current amplification is performed via E88CC triodes , coupled through the use of Mundorf Supreme Silver/Gold/Oil capacitors.
The primary amplification stage uses a proprietary Circle Power topology designed for high power solutions.
Sound single-ended amplifiers, is joined by solid-state amplifier dynamic and bass control.
Warranty is 2 years. Price is 98000 NOK
Specification
Output power stereo mode:
160W/8Ω, 300W/4Ω
Output power monoblock mode:
600W/8Ω, 930W/4Ω
Frequency response:
2 hz-1 MHz (- 3dB)
Input sensitivity:
0,85V (full power)
Amplification:
35 dB
Input impendance:
100 kΩ
Size (W x D x H):
430 x 355 x 178 mm
Net weight:
20 kg
Shipping weight:
28,5 kg
Power consumption
Stand by:
< 0,1W
On Const:
90W
ON max:
950W
CONTACT US
Email: info@matsaudio.no
Mobile: +4791799684